Savant SST-W100 User's Guide download pdf (Page 11)

Set Clock

To set the clock, follow the steps below:

1. Press the Menu button to get to the Menu Selection screen.

2. Use the up and down arrows to select the appropriate menu item.

3. Select User Settings.

4. Press Select to go to the User Settings screen.

5. Scroll down to Set Clock.

6. Press Select to display the Set Clock screen.

7. Use the navigation keys with the arrows on them below the data to highlight the information you want to change.

8. Use the + and - buttons change the data in the setting.

9. Press the Set button to return to the Main Menu screen.

NOTE: If the clock has been reset by an extended power outage, the clock display on the main thermostat

screen will be blinking

10. Press the Done button twice to exit back to the main thermostat screen.

Filter Service

To set or rest the filter timer/alert, follow the steps below:

1. Press the Menu button to get to the Menu Selection screen.

2. Use the up and down arrows to select the appropriate menu item.

3. Select User Settings.

4. Press Select to go to the User Settings screen.

5. Scroll down to Filter Service.

6. Press Select to display the Filter Service screen.

7. The Filter Service screen shows runtime hours and service interval all in hours (typically 300 hours).

8. To adjust the service interval, use the +/- buttons.

9. After changing the filter, reset the service alert.

10. Press the Done button twice to exit back to the main thermostat screen.

Maint Service

To set or reset the service interval hours, follow the steps follow:

When the combined Heat and Cool runtime hours equals the Service Interval hours, a Maint message will be displayed

on the Main menu. This is a reminder that the HVAC system may require maintenance. Follow the steps below to set or

reset the maintenance timer/alert:

1. Press the Menu button to get to the Menu Selection screen.

2. Use the up and down arrows to select the appropriate menu item.

3. Select User Settings.

4. Press Select to go to the User Settings screen.

5. Scroll down to Maint Service.

6. Press Select to display the Maint Service screen.

7. The Maint Service screen shows the accumulated Heat and Cool runtime hours and the Service Interval (3000

hours) that will be used to trigger a Maintenance alert.

061313 009-0957-00

11 of 17

Savant Wireless Thermostat (SST-W100) User Guide

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Savant SST-W100 User's Guide Page 11